Dosing system  GENODOS DM-T 100/200
GP pump under seal

To disinfect or sterilise the water
to be treated by adding GENO-Chlor A

Consisting of:

1 Dosing pump type GP-1/40 (4G) 
  as self-priming diaphragm pump 
  automatically deaerating against 
  pressure, with synchronous motor, 
  fixing bracket, power supply cable
  with Schuko socket, displays for 
  operation, empty signal, level pre-
  alarm, membrane break and dosing 
  monitoring.

  Control unit suitable for internal or 
  external operation, pulse division or 
  multiplication, input for external 
  voltage-free control as well as 
  transfer of voltage-free fault signal 
  to monitoring station, analogue 
  triggering possible.

1 Water meter with pulse generator, 
  pulse cable to the pump’s electronics, 
  including water meter screw 
  connections

1 Dosing tank type 200-HMI
  made of black HDPE to store the
  chemical solution, with litre scale
  and screwed cover

  Content, approx.            :   200 l
  Diameter, approx.           :   600 mm
  Tank height, approx.        :   995 mm
  Required room height, approx: 1,700 mm

1 Suction lance with pre-alarm as well
  as empty signal and foot valve for 
  connection to dosing pump GENODOS-GP 
  (available separately) 

1 Dosing group 2.70
  Inlet tube, non-return valve
  PPh R 3/8" and PVC hose nipple

1 PTFE dosing line 
  id = 4  od = 6  1,000 mm in length

1 Pressure maintaining valve DHV 4,
  10 bar, to maintain the exact dosing 
  capacity in case of counter pressures 
  < 1 bar (10 mWC)as well as fluctuating 
  counter pressures

Technical specifications:

Water meter connection:  DN 100
Max. flow             :  100 m³/h
Pressure loss at
max. flow             :  0.8 bar
Nominal pressure (PN) :  10 bar
Installation length
with flange connection:  310 mm
Pulse sequence        :  3.8 l/pulse
Dosing capacity       :  0.9 l/h
                         at max. 10 bar
Water/ambient temp.   :  5 – 30 °C
Power supply          :  230V/50Hz/18VA
Protection/
insulation class      :  IP 54
Media-contacting parts:  PPO/PTFE/glass/
                         Hastelloy
Max. suction head     :  1.5 mWC

Make: Grünbeck
Dosing system  GENODOS DM-T 100/200
GP pump under seal

To disinfect or sterilise the water
to be treated by adding GENO-Chlor A

Consisting of:

1 Dosing pump type GP-1/40 (4G) 
  as self-priming diaphragm pump 
  automatically deaerating against 
  pressure, with synchronous motor, 
  fixing bracket, power supply cable
  with Schuko socket, displays for 
  operation, empty signal, level pre-
  alarm, membrane break and dosing 
  monitoring.

  Control unit suitable for internal or 
  external operation, pulse division or 
  multiplication, input for external 
  voltage-free control as well as 
  transfer of voltage-free fault signal 
  to monitoring station, analogue 
  triggering possible.

1 Water meter with pulse generator, 
  pulse cable to the pump’s electronics, 
  including water meter screw 
  connections

1 Dosing tank type 200-HMI
  made of black HDPE to store the
  chemical solution, with litre scale
  and screwed cover

  Content, approx.            :   200 l
  Diameter, approx.           :   600 mm
  Tank height, approx.        :   995 mm
  Required room height, approx: 1,700 mm

1 Suction lance with pre-alarm as well
  as empty signal and foot valve for 
  connection to dosing pump GENODOS-GP 
  (available separately) 

1 Dosing group 2.70
  Inlet tube, non-return valve
  PPh R 3/8" and PVC hose nipple

1 PTFE dosing line 
  id = 4  od = 6  1,000 mm in length

1 Pressure maintaining valve DHV 4,
  10 bar, to maintain the exact dosing 
  capacity in case of counter pressures 
  < 1 bar (10 mWC)as well as fluctuating 
  counter pressures

Technical specifications:

Water meter connection:  DN 100
Max. flow             :  100 m³/h
Pressure loss at
max. flow             :  0.8 bar
Nominal pressure (PN) :  10 bar
Installation length
with flange connection:  310 mm
Pulse sequence        :  3.8 l/pulse
Dosing capacity       :  0.9 l/h
                         at max. 10 bar
Water/ambient temp.   :  5 – 30 °C
Power supply          :  230V/50Hz/18VA
Protection/
insulation class      :  IP 54
Media-contacting parts:  PPO/PTFE/glass/
                         Hastelloy
Max. suction head     :  1.5 mWC

Make: Grünbeck